How do I calculate shipping class?

Freight Class Calculator

- First measure the height, width, and depth of the shipment.
- Multiply the three measurements (height x width x depth).
- Finally, divide the weight (in pounds) of the shipment by the total cubic feet.

Multiply the measurements together (length x width x height). Divide the result by 1,728 (cubic inches per foot) to find the cubic feet of the shipment. Divide the weight by the total cubic feet. This result is the freight density, or pounds per cubic foot (#PCF).

How do you find density class?

To calculate density, just divide the weight of your shipment by the total cubic feet. For example, if your shipment weighed 575 pounds and came out to 55.55 cubic feet, the equation would look like this: 575/55.55 = 10.35.

How to Calculate Freight Density for Shipping

- Multiply the three measurements (height x width x depth). The result is the total cubic inches of the shipment.
- Divide the total cubic inches by 1,728 (the number of cubic inches in a cubic foot).
- Divide the weight (in pounds) of the shipment by the total cubic feet.

What is freight Class 70?

What is Freight Class 70? Freight class 70 is one of the classes on the NMFC code list that ranges from 50-500. Common commodities and materials for freight class 70 can include: food items, car parts and engines, unassembled furniture, and machinery.

The simplest way to think of it is, the lower the freight class, the lower the shipping price. A class 75 item will be cheaper than a class 400 item. There are two ways classification is made. Items that are classified by density and items that have a permanent class not based on weight or size, such as a transmission.19-Feb-2014

Is PCF the same as density?

Density is simply a measurement of weight per unit of volume. In the case of foam, it is measured in pounds per cubic foot (PCF). In other words, the density of foam is expressed by measuring the weight of a single cubic foot of foam material.11-Mar-2022

How to Determine LTL and Freight Class?

- Know your commodity type.
- Measure your pallet dimensions and weight.
- Multiply length * width * height to determine total cubic feet.
- Divide the weight of the shipment by the total cubic feet.

What is PCF in LTL shipping?

Freight rates are based on a number of factors including, PCF (Pounds Per Cubic Foot). A low PCF will result in a higher class rating and a higher cost per pound for shipping.

How can I calculate weight?

Weight is a measure of the force of gravity pulling down on an object. It depends on the object's mass and the acceleration due to gravity, which is 9.8 m/s2 on Earth. The formula for calculating weight is F = m × 9.8 m/s2, where F is the object's weight in Newtons (N) and m is the object's mass in kilograms.06-Jun-2021

Length x Width x Height = CBM This is the formula used to measure your cargo volume in CBM (m³). Say, you have a carton that is 2 metres long, 2 metres wide and 2 metres high. Then, its volume is 2 x 2 x 2 = 8 m³.01-Feb-2021

How do you calculate cargo?

The general allocation formula is: Allocation factor = Shipment size / (Cargo load factor * Cargo carrier capacity) where: Shipment size is the size of the shipment that is subject of the transport. Cargo carrier capacity is the maximum load capacity of the vehicle.

What is freight density? Freight density is the weight of the shipment in relation to the size of the shipment. If you have a shipment that is low in density, it will have a higher classification. Denser shipments have lower classifications.03-Jun-2019

What is shipping Class 50?

Freight shipping class 50 applies to only the densest and easily transportable freight items. Typically, to qualify for code 50, a shipment must have a weight range per cubic foot of over 50 lbs, be very durable and easily handled, and able to be shrink-wrapped and stowed on a standard 4x4 pallet.

The weight range and density for a shipment to qualify as class 55 freight is between 35 and 50 pounds per cubic foot. Some items you'll find commonly shipped as freight class 55 are: copy paper, rags, mortar, and hardwood flooring.

What is a freight shipping Class 65?

Freight Class 65 is the classification most appropriate for car parts & accessories, bottled beverages, books in boxes, conveyors, chocolate in boxes, electric cords and/or tile that weigh 22.5-30lbs per cubic foot.

Freight class list

What is the NMFC code for class 70?

CLASS 70, NMFC code 99992 – Hops – Pellets compressed.17-Feb-2015

What is Freight Class 125? Freight Class 125 is the classification most appropriate for small household appliances, pictures/posters in boxes, exhibit booths and/or vending machines that weight 7-8lbs per cubic foot.

What is PCF weight?

Pounds Per Cubic Feet (PCF)

How do I calculate shipping class?